To Next PageTo Next Page
Need help?Do you have a question about the Parkside 1200 A1 and is the answer not in the manual?
General| Power | 1200 W |
|---|---|
| Bore | 20 mm |
| Voltage | 230 V |
| Cutting angle | 0°-45° |
| Uncertainty K | 3 dB |
| Saw blade | TCT |
Defines the purpose and limitations of the router for milling wood and plastic.
Lists and identifies the main components and parts of the router device.
Details all the accessories and items included in the product package.
Provides key specifications like power input, voltage, idle speed, and tool holder size.
Guidelines for maintaining a clean, well-lit work area and keeping others away.
Precautions regarding mains plugs, earthed surfaces, and water exposure.
Advice on staying alert, wearing protective equipment, and avoiding unintentional operation.
Instructions on not overloading the tool, checking switches, and keeping it away from children.
Guidance on device repair, cleaning, and care for safe operation.
Safety tips for holding the tool, securing workpieces, and potential kickback.
Advice on router tool speed, fit, switching on before use, and hand placement.
Recommendations on using only compatible accessories and tools with the device.
Details the router bits included and their intended profiling applications.
Step-by-step guide on how to insert and secure router bits using the tool.
Instructions for connecting the dust extraction adapter to the router base.
How to connect and disconnect the reducer for dust extraction hoses.
Procedure for replacing the collet to accommodate different router bit shaft sizes.
Steps to assemble and attach the guide fence for straight cuts.
Instructions on how to safely activate and deactivate the router's power.
Guide to adjusting the router's rotational speed using the speed setting wheel.
Detailed steps for setting the initial milling depth using the depth stop.
Procedure for fine-tuning or adjusting the milling depth during operation.
Using the step stop for achieving deeper cuts in multiple stages with less effort.
Explains the correct direction of milling relative to router bit rotation to prevent kickback.
Guidance on performing the milling operation with steady speed and pressure.
Instructions for setting up and using the copy casing to transfer patterns.
Steps for transferring patterns onto workpieces using the copy casing.
How to attach and use the rip fence for creating straight cuts along an edge.
Instructions for using the circular compass attachment for cutting circles.
Guidance on cleaning the router and safety warnings for maintenance.
Details the warranty period, coverage, and how to make a claim.
Information on environmentally friendly disposal of packaging and the electrical tool.
Statement of compliance with EU directives and harmonized standards.
Provides the device type, date of manufacture, and serial number.
