Why is my Parkside PAS 1200 A1 losing suction?
A loss of suction in your Parkside Vacuum Cleaner can occur for several reasons. The suction hose or tube may be blocked, so clear any obstructions. Ensure the metal container is properly closed. If the metal container is full, empty it. A clogged pleated filter or air filter can also cause this issue; clean or replace the pleated filter and clean the air filter.
What to do if my Parkside PAS 1200 A1 won't start?
If your Parkside Vacuum Cleaner isn't starting, there could be several reasons. First, check the plug socket, power cord, line, plug and fuse to ensure mains voltage is present; if necessary, have an electrical specialist make repairs. Make sure the equipment is switched on. Also, check that the pleated filter or metal filter cage is correctly inserted. A defective on/off switch may also be the cause; this requires repair through customer service. If these steps don't resolve the issue, the motor may be defective.
General| Brand | Parkside |
|---|---|
| Model | PAS 1200 A1 |
| Category | Vacuum Cleaner |
| Language | English |
To Next Page