EasyManua.ls Logo

Parkside PAS 500 B1 - User Manual

Parkside PAS 500 B1
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
4
HAMUPORSZÍVÓ
Az originál használati utasítás fordítása
SESALNIK ZA PEPEL
Prevod originalnega navodila za uporabo
ODKURZACZ KOMINKOWY
Tłumaczenie oryginalnej instrukcji obsługi
ASH VACUUM CLEANER
Translation of original operation manual
VYSAVAČ POPELA
Překlad originálního provozního návodu
VYVAČ POPOLA
Preklad originálneho návodu na obsluhu
ASH VACUUM CLEANER PAS 500 B1
ASCHESAUGER
Originalbetriebsanleitung
66991_par_Aschesauger_PAS_500_B1_Cover_LB4.indd 14 03.08.11 10:06

Table of Contents

Other manuals for Parkside PAS 500 B1

Questions and Answers

  • A
    amber71Aug 12, 2025
    Why does my Parkside Vacuum Cleaner have low or no suction?
    • S
      Shannon DavisAug 12, 2025
      The Parkside Vacuum Cleaner may have low or no suction due to several reasons: the suction hose or tube might be blocked (clear any obstructions), the metal container might not be closed properly (ensure it's closed), the metal container might be full (empty it), the pleated filter might be clogged (clean or replace it), or the air filter might be clogged (clean it).
  • A
    Amber SmithAug 18, 2025
    What to do if my Parkside PAS 500 B1 Vacuum Cleaner has low suction?
    • I
      Isaac HendersonAug 18, 2025
      If your Parkside Vacuum Cleaner has low or no suction, consider the following: * The suction hose or suction tube might be blocked. Remove any obstructions or blockages. * The metal container might not be closed properly. Ensure the metal container is closed. * The metal container might be full. Empty the metal container. * The pleated filter might be clogged. Clean or replace the pleated filter. * The air filter might be clogged. Clean the air filter.
  • D
    David ThompsonAug 27, 2025
    What to do if my Parkside Vacuum Cleaner does not start?
    • T
      taylorthomasAug 27, 2025
      If your Parkside Vacuum Cleaner isn't starting, here are a few things to check: * Make sure the mains voltage is present by checking the plug socket, cable, line, plug, and fuse. If needed, have an electrical specialist make repairs. * Ensure the equipment is switched on. * Check that the pleated filter is correctly inserted. If not, insert it correctly. * If these steps don't work, the on/off switch or the motor may be defective.
  • F
    Frank BaileySep 3, 2025
    Why is my Parkside Vacuum Cleaner not starting?
    • J
      Jeremiah SimpsonSep 3, 2025
      Your Parkside Vacuum Cleaner might not start due to several reasons: * There is no mains voltage present. Check the plug socket, cable, line, plug and fuse. If needed, repair through an electrical specialist. * The equipment is not switched on. Make sure to switch on the equipment. * The safety stop is activated because the pleated filter is missing or incorrectly inserted. Insert the pleated filter correctly. * The on/off switch is defective. It should be repaired by customer service. * The motor might be defective.

Parkside PAS 500 B1 Specifications

General IconGeneral
BrandParkside
ModelPAS 500 B1
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals