Parkside PASD 4 B2 - General Safety Directions for Power Tools

32
GB
Graphical symbols on the bits:
1000V
Indication of the
electrical working limit
General Safety Directions
for Power Tools
WARNING! Read all
safety notices, instruc-
tions, illustrations and technical
data that have been provided
with this power tool. Omissions

directions and instructions can

and/or severe injuries.
Retain all safety directions and
instructions for future use.

the warnings refers to your

-

1) WORK AREA SAFETY
a) Keep work area clean and
well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools
in explosive atmospheres,
such as in the presence of
ammable Iiquids, gases
or dust. Power tools create

dust or fumes.
c) Keep children and bystand-
ers away while operating a
power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not
use any adapter plugs with
earthed (grounded) power
tools.
matching outlets will reduce
risk of electric shock.
b) Avoid body contact with
earthed or grounded surfac-
es, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of
electric shock if your body is
earthed or grounded.
c) Do not expose power tools
to rain or wet conditions.