12 GB
Before first use
Remove the packaging material. Check if all parts
are complete.
The product’s installation site must meet the
following requirements for safe operation:
Temperature requirements
Max. temperature (flowing water) +40 °C
Min. temperature (flowing water) +5 °C
Max. temperature (environment) +50 °C
Only use clear, fresh water.
m
ATTENTION! Connect the product vertically,
with the connector
[8] pointed downwards.
This prevents water from entering the battery
compartment
[].
m
ATTENTION! The product shall only be
connected to a drinking water abstraction point
with a safety device which corresponds to TYPE HD
at the very least according to EN 1717 (backflow
preventer with tube ventilation).
To Next Page
Loading...
