Parkside PBSD 900 A2 - Operation: Ergonomics and Dust Management; Adjusting the Additional Handle; Flipping Up the Front Cover; Dust Extraction Unit Attachment

■ 6
│
GB
│
IE
PBSD900A2
Adjusting the additional handle
You can position the additional handle in
several different positions.
♦ To reposition the additional handle
undo the
screw
.
♦ Move the additional handle
to the required
position.
♦ Retighten the screw
.
Flipping up the front cover
You can flip up the front cover to grind in
hard-to-reach areas (see illustration).
WARNING!
► The front cover
can only be flipped
upwards if the additional handle is also
positioned upwards (see section "Adjusting
the additional handle").
♦ Flip up the front cover
.
Attaching/removing a dust
extraction unit
WARNING! RISK OF EXPLOSION!
■ If there is an explosive dust/air mixture, you
must use a specially designed extraction
appliance. RISK OF FIRE DUE TO FLYING
SPARKS! Do not use dust extraction systems
(dust collector
or vacuum cleaner) when
grinding metals.
■ Materials containing asbestos must not be
processed. Asbestos is a known carcinogen.
WARNING! RISK OF FIRE!
■ When working with power tools which have
a dust collector or can be connected to a
vacuum cleaner via a vacuum cleaner adapter,
there is a risk of fire! In unfavourable condi-
tions, e.g. when sparks are flying while
sanding metal or metal residues in wood,
wood dust in the dust collector (or the bag of
the vacuum cleaner) can spontaneously
ignite. This is a particular risk if the wood dust
is mixed with paint residues or other chemi-
cals and the workpiece has become hot after
being worked for a long time. Therefore, do
not allow the workpiece to overheat and
always empty the dust box or the dust bag
ofthe vacuum cleaner before taking a break
from work.
■ Ensure that your workplace is adequately
ventilated.
■ Observe the regulations applicable in your
country regarding the materials to be
worked.
■
Wear a dust mask.