Parkside PEPS 3 A1 User Manual

PEPS 3 A1 GB
│
IE
│
9 ■
Before use
Removing/inserting batteries
NOTE
♦ Before using the appliance for the first time, remove the plastic
film on the battery pole.
♦ Open the cap 1 by turning it anticlockwise.
♦ Remove the plastic film.
♦ Close the cap 1 by turning it clockwise.
♦
Ensure that the batteries are inserted with the correct
polarity. This is indicated on the cap 1.
Inserting bits
Insertion
♦ Insert an appropriate bit 7 into the tool holder 6.
Removal
♦ Pull the bit 7 out of the tool holder 6.
Using the appliance
Switching on/off
Switching on
♦ To start the appliance, press and hold either the rotation
direction switch: right ▲ 4 or the rotation
direction switch: left ▼ 3.
♦ The LED work light 5 lights up. This provides illumination
of the work area in poor lighting conditions.

Parkside PEPS 3 A1 Specifications

General

Brand	Parkside
Model	PEPS 3 A1
Category	Power Screwdriver
Language	English