EasyManuals Logo

Parkside PHD 100 A1 User Manual

Parkside PHD 100 A1
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
GB IE
Operation
Connect the equipment to the water
tap. Observe the regulations for the
use of a system separator.
Turn on the water tap entirely.
Never operate the pressure wash-
er with a closed water tap. Dry run-
ning will damage the washer!
Be prepared for the recoil force
of the emitted water jet! Ensure
that you are standing rmly and
that you are holding the gun (
A
5) securely, otherwise you could
injure yourself or other people.
Switch on the pressure washer with
the ON / OFF switch (
A
5).
Pull the lever of the gun (
A
10) to
turn on the washer.
Hold the switch-on lever of the gun
(
A
10) until there is no more air in the
pressure washer.
Releasing the lever will switch
off the washer, but the pressure
within the system is retained.
D
Lock / unlock the switch-on le-
ver of the gun (10) by depress-
ing the locking button (17).
Lock the switch-on lever to prevent the
pressure washer from being inadvert-
ently / accidentally started.
Locked
Open
Interrupting operation
Release the lever of the gun (
A
10).
During prolonged work intervals turn
off the washer by its ON / OFF switch
(
A
5).
Ending operation
After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
Release the lever of the gun (
A
10).
Turn off the pressure by its ON / OFF
switch (
A
5).
Turn off the water tap.
Disconnect the pressure washer from
the water mains.
Pull the lever of the gun (
10) to
vent the pressure existing within the
system.
Disconnect the mains plug.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
E
Fixing the Wheels
The back wheels on the chassis (9) can
be xed in order to secure the pressure
washer against undesired rolling away.
To do this push the two bolts (16) out-
wards and downwards.
The wheels are now no longer able to
turn.

Table of Contents

Other manuals for Parkside PHD 100 A1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PHD 100 A1 and is the answer not in the manual?

Parkside PHD 100 A1 Specifications

General IconGeneral
BrandParkside
ModelPHD 100 A1
CategoryPressure Washer
LanguageEnglish

Related product manuals