EasyManua.ls Logo

Parkside PHD 100 D2 - Electrical Safety Precautions; Electrical Safety Guidelines

Parkside PHD 100 D2
48 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
GB
Warning ! To ensure machine safety,
use only original replacement parts
from the manufacturer or replacement
parts authorised by the manufacturer.
Electrical safety:
Caution: to avoid accidents and
injuries from electric shocks:
Warning ! The plug and socket of an
extension cable must be water-tight!
Warning ! Unsuitable extension
cables can be dangerous as peo-
ple can be harmed by an electric
shock!
Protect the electric plug connections
against moisture.
If there is a risk of ooding, x the
plug connections in an area that is safe
from ooding.
Ensure that the mains voltage matches
the specications on the rating plate.
The electrical installation shall be ac-
cording to national wiring rules.
The electric supply connection shall be
made by a qualied electrician and
comply with IEC 60364-1.
It is recommended that the electric
supply to this machine should include
either a residual current device that
will interrupt the supply if the leakage
current to earth exceeds 30 mA for 30
ms or a device that will prove the earth
circuit.
Before each use, check the equipment,
cable and plug for damage.
If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualied per-
son in order to prevent hazards.
Warning ! Do not work with dam-
aged or incomplete equipment, or with
equipment that has been converted
without the approval of the manufac-
turer. Before initial operation, have a
specialist check that the required elec-
trical protection measures are in place.
Warning ! Never operate the pres-
sure washer if the power supply cable
or other important parts, such as the
high-pressure hose or the gun, are
damaged.
Protect the pressure washer from frost
and dry running.
Use only original accessories and do
not carry out conversion work on the
equipment.
Please read the notes in the operating
instructions on the topic of “mainte-
nance and cleaning”. Any measures
above and beyond these, particularly
opening the equipment, are to be car-
ried out by an electrician. In the case
of repairs, always contact our service
centre.
Warning ! The washer was designed
for operation with a neutral detergent
based on a biologically decomposable
anionic tenside. Other detergents or
chemical substances could impair the
safety of the washer and damage it.
If you come into contact with cleaning
agents, rinse with plenty of clean wa-
ter.
Warning ! Water that has passed
through a backow preventer is classi-
ed as undrinkable.
Warning ! High-pressure hoses, t-
tings and couplings are important for
machine safety. Use only high-pressure
hoses, ttings and couplings recom-
mended by the manufacturer.

Table of Contents

Other manuals for Parkside PHD 100 D2

Related product manuals