To Next PageTo Next Page
Need help?Do you have a question about the Parkside PHKS 1400 and is the answer not in the manual?
General| Power consumption | 1400 W |
|---|---|
| Idle speed | 5000 rpm |
| No-load speed | 5000 rpm |
| Blade diameter | 190 mm |
| Max cutting depth at 45° | 44 mm |
Details on the various components and functions of the PHKS 1400 circular saw.
Provides key specifications, power ratings, and performance data for the circular saw.
Essential safety precautions and guidelines for operating the circular saw safely.
Instructions for adjusting the guide plate angle for precise cuts.
Guidance on using the angle gauge to set the desired cutting angle accurately.
Steps for adjusting the cutting depth based on material thickness for clean cuts.
Explanation of the safety switch and how to operate the power switch.
How to adjust the parallel guide for controlling the width of cut.
Basic steps for operating the circular saw, including starting and cutting.
Advisory settings for the electronic speed control based on material type.
Instructions on how to attach, remove, and set the reamer for safe operation.
Step-by-step guide for replacing the saw blade safely and correctly.
Procedure to correct blade alignment if the saw pulls left or right.
Information on connecting systems for sawdust extraction.
Guidelines for cleaning and maintaining the circular saw for optimal performance.
Practical advice and helpful tips for using the circular saw effectively.
