Why does my Parkside PKS 1500 A2 Saw motor overheat easily?
Your Parkside Saw motor may overheat because it is being overloaded or not sufficiently cooled. To resolve this, avoid overloading the motor during cutting. Additionally, remove any dust from the motor to ensure it cools effectively.
What to do if my Parkside Saw motor does not work?
If the motor of your Parkside Saw doesn't work, the cause may be a defective motor, cable, or plug, or burnt fuses. Check the fuses and replace them if necessary. It is recommended to arrange for a specialist to inspect the machine. Never attempt to repair the motor yourself due to the danger.
Why doesn't my Parkside Saw motor reach its full power?
The motor in your Parkside Saw might not reach its full power because the circuits in the network are overloaded by other equipment like lamps or other motors. To fix this, avoid using other equipment or motors on the same circuit.
How to fix a rough or wavy saw cut with my Parkside Saw?
A rough or wavy saw cut from your Parkside Saw is likely due to a dull saw blade or a tooth shape that isn't appropriate for the material thickness. To correct this, resharpen the saw blade or use a suitable blade for the material you're cutting.
Why does my Parkside Saw motor start slowly and not reach full speed?
If your Parkside Saw motor starts slowly and doesn't reach its operating speed, it could be due to low voltage, damaged coils, or a burnt capacitor. Contact the utility provider to check the voltage. It's also recommended to arrange for a specialist to inspect the motor and replace the capacitor.
What to do if the workpiece pulls away or splinters when using my Parkside Saw?
If the workpiece pulls away or splinters when using your Parkside Saw, it may be due to excessive cutting pressure or an unsuitable saw blade. Try inserting a suitable saw blade.
Why is my Parkside Saw motor making excessive noise?
If your Parkside Saw motor is making excessive noise, the cause might be damaged coils or a defective motor. It is recommended to arrange for a specialist to inspect the motor.
Lists items included with the mitre saw, such as dust bag, workpiece clamp, tools, and accessories.
Provides specifications like dimensions, weight, speed, power, and cutting capacity of the mitre saw.
Details the noise levels (LpA, LA) and advises on hearing protection if noise exceeds 85 dB(A).
Outlines general safety precautions for using electric tools, like keeping the area tidy and protecting against electric shock.
Explains the mitre saw's intended use for wood/plastic and warns against misuse or using incorrect blades.
Emphasizes protective gear, dust extraction, and safe handling of blades and components.
Covers safe practices for maintenance, including unplugging the tool and securing parts.
Provides instructions on using insertion tools, observing speed limits, and proper blade mounting.
Guides on unpacking and assembling the mitre saw, including dust bag and workpiece clamp.
Details how to move the saw and set up the work station for stable and safe operation.
Explains how to pivot the table plate and tilt the saw unit to desired angles using scales.
Details cross-cutting, mitre cuts, and double mitre cuts, including workpiece fixing and saw operation.
Warns about damaged cables, explains AC motor specifics, and mentions motor overload protection.
Covers routine service tasks, decommissioning, and environmentally friendly disposal of the machine.
Lists common faults, their possible causes, and remedies for the mitre saw.
Explains the terms and conditions for guarantee claims, coverage, and exclusions.
Lists the EU directives and standards the product complies with, including safety and emission standards.
General| Power | 1500 W |
|---|---|
| No-load speed | 5000 rpm |
| Blade diameter | 190 mm |
| Bore diameter | 30 mm |
| Cutting depth at 45° | 0 - 45 mm |
To Next Page
