To Next PageTo Next Page
Need help?Do you have a question about the Parkside PHKS 1450 LASER and is the answer not in the manual?
General| Power | 1450 W |
|---|---|
| Laser Type | Class 2 |
| Cutting Depth (Max) | 65 mm |
| Blade Diameter | 190 mm |
| Idle Speed | 5000 rpm |
| Bore | 20 mm |
| Bevel Angle | 0-45° |
| Cutting Depth at 90° | 65 mm |
| Laser Guide | Yes |
Explains the intended application and limitations of the circular saw for specific materials.
Details specifications such as power input, voltage, speed, and blade dimensions for the device.
Provides information on sound pressure levels and hand-arm vibration values measured according to standards.
Advises on maintaining a clean, well-lit workspace and keeping children away during operation.
Covers mains plug, earthed surfaces, moisture, and mains lead safety to prevent electric shock.
Emphasizes staying alert, wearing PPE, avoiding unintentional operation, and maintaining balance.
Guides on not overloading the device, checking switches, removing tools before operation, and proper maintenance.
Highlights age restrictions, checking device condition, and safe use with RCDs and outdoor extension leads.
Explains the causes of kickback and provides precautions to prevent it during sawing operations.
Details the correct use and checks for the automatic blade guard to ensure operational safety.
Explains the proper use and adjustment of the riving knife for preventing kickback.
Offers further advice on holding the saw, handling jams, restarting, supporting workpieces, and blade condition.
Describes the procedure for safely switching the circular saw on and off, including soft start.
Details how to accurately set the desired cutting angle using the angle scale and clamp.
Explains how to set the cutting depth according to the material thickness for a clean cut.
Guides on attaching and securing the guide fence for parallel cuts.
Instructions for activating and deactivating the integrated laser guide.
Provides steps for positioning, aligning, and sawing with the circular saw using both hands.
Explains how to adjust the rotational speed using the setting wheel for different materials.
Details how to connect a vacuum cleaner for effective sawdust and splinter extraction.
Step-by-step guide for safely replacing the saw blade, including spindle lock usage.
Instructions for installing and adjusting the riving knife to prevent kickback.
Information on the legal requirements for recycling batteries environmentally.
Directs users to find service information in the warranty documentation for repairs.
Declares compliance with EU directives and lists relevant standards for the device.
