To Next PageTo Next Page
Need help?Do you have a question about the Parkside PISG 100 A1 and is the answer not in the manual?
General| Input voltage | 230 V |
|---|---|
| Welding current | 20 - 100 A |
| Protection class | IP21S |
| Electrode diameter | 1.6 - 3.2 mm |
| No-load voltage | 48 V |
| Max. electrode diameter | 3.2 mm |
Explains safety symbols and provides an overview of the welder's intended use and delivery.
Identifies components and lists key technical data like electrical and performance parameters.
Essential safety guidelines to follow before and during operation.
Covers packaging risks, device operation, electrical safety, and necessary personal protective equipment.
Addresses risks from welding fumes, sparks, arc beams, and electromagnetic fields.
Safety protocols for hazardous environments and welding in confined areas.
Measures for protecting against rays, burns, and information on EMC classification.
Steps for unpacking, assembling the welding mask, and preparing the workspace.
Guide to connecting, starting, adjusting, welding methods, and electrode replacement.
Routine cleaning, servicing, and maintenance tasks for optimal performance.
Disposal guidelines, conformity statements, warranty terms, and service contacts.
