To Next PageTo Next Page
Need help?Do you have a question about the Parkside PMSG 200 A1 and is the answer not in the manual?
General| Welding current I2 | 200 A |
|---|---|
| Electrode diameter | 1.6 - 4.0 mm |
| Protection class | IP21S |
| Duty cycle | 60% at 200 A |
| Input voltage | 230 V / 50 Hz |
| Output current range | 20 - 200 A |
Specifies the applications and limitations of the welding device.
Lists all items included in the delivery of the multi-welder.
Identifies and describes the various components of the multi-welder.
Details the electrical and performance characteristics of the welding device.
Outlines the risks associated with electric arc welding and protective measures.
Details the correct use and maintenance of the welding mask for safety.
Provides safety guidelines for welding in environments with higher electrical risks.
Specifies the required clothing and gear for safe welding operations.
Instructions for assembling and preparing the welding device for operation.
Details how to set up the device for MIG welding with solid wire and gas.
Explains the setup for MIG welding using flux-cored wire without external gas.
Provides instructions for loading the welding wire into the machine.
Describes the procedure for powering the welding device on and off.
Guides the user on selecting the correct welding wire setting on the device.
General guidance on the welding process, including overload protection.
Outlines the terms and duration of the product warranty.
Details warranty duration and reporting of defects.
Specifies what the warranty covers and what it excludes.
Explains the steps for submitting a warranty claim.
Provides contact details for customer service and support.
