Parkside PMSG 200 A1 User Manual

28
GB/CY
 EU Declaration of
Conformity
We,
C. M. C. GmbH
Responsible for documentation:
Dr Christian Weyler
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
hereby take sole responsibility for
declaring that the product
Multi-Welder
Item number: 2336
Year of manufacture: 2021/18
IAN: 337263_2007
Model: PMSG 200 A1
meets the basic safety requirements as
specifi ed in the European Directives
EC low-voltage directive
2014/35/EU
EC Guideline on Electromagnetic
Compatibility
2014/30/EU
RoHS directive
2011/65/EU+2015/863/EU
and the amendments to these Directives.
The manufacturer will be solely respon-
sible for the creation of the declaration
of conformity. The object of the declara-
tion described above meets the require-
ments of Directive 2011/65/EU of the
European Parliament and of the Council
of 8 June 2011 on the restriction of the
use of certain hazardous substances in
electrical and electronic equipment.
This conformity assessment is based on
the following harmonised standards:
EN 60974-1:2018/A1:2019
EN 60974-10:2014/A1:2015
St. Ingbert, 01/10/2020
pp Dr Christian Weyler
– Quality Assurance –
 Warranty and service
information
Warranty from Creative Marketing
& Consulting GmbH
Dear Customer,
The warranty for this equipment is
3years from the date of purchase. In
the event of product defects, you have
legal rights against the retailer of this
product. Your statutory rights are not
affected in any way by our warranty
conditions, which are described below.
 Warranty conditions
The warranty period begins on the date
of purchase. Please retain the original
sales receipt. This document is required
as your proof of purchase.
Should this product show any defect
in materials or manufacture within
3years from the date of purchase, we
willrepair or replace it – at our dis-
cretion – free of charge. This warranty
service requires that you retain proof of
purchase (sales receipt) for the defective
device for the three year period and
that you briefl y explain in writing what
the fault entails and when it occurred.
If the defect is covered by our warranty,
we will repair and return your product
or send you a replacement. The original
EU Declaration of Conformity / Warranty and service information

Parkside PMSG 200 A1 Specifications

General

Welding current I2	200 A
Electrode diameter	1.6 - 4.0 mm
Protection class	IP21S
Duty cycle	60% at 200 A
Input voltage	230 V / 50 Hz
Output current range	20 - 200 A