Parkside PKO 270 A4 User Manual (English)

Other manuals for Parkside PKO 270 A4

Operating And Safety Instructions, Translation Of Original Operating Manual64 pages

Questions and Answers:

D
David BullockAug 18, 2025
What to do if my Parkside Air Compressor does not start?
- J
  Jeffrey HallAug 18, 2025
  If your Parkside Air Compressor isn't starting, several factors could be at play. First, check the supply voltage, power plug and the socket-outlet to ensure they are working correctly. Insufficient voltage could also be the issue, so ensure your extension cable isn't too long and has adequately sized wires. Also, the compressor may not start if the outside temperature is below +5° C. Finally, the motor may be overheated; allow it to cool down, and address the cause of overheating if necessary.
A
Alice KellyAug 21, 2025
Why does my Parkside Air Compressor start but there is no pressure?
- W
  Wesley AndrewsAug 21, 2025
  If your Parkside Air Compressor starts but doesn't build pressure, it could be due to a few reasons. The drain plug for condensation water might be leaking; try tightening it by hand and check the seal, replacing it if needed. Damaged seals could also be the culprit; inspect them and have them replaced by a service center.
T
Tiffany BrooksAug 23, 2025
What to do if my Parkside PKO 270 A4 Air Compressor starts but the tools don't?
- K
  Katrina PrattAug 23, 2025
  If your Parkside Air Compressor starts and shows pressure, but your tools aren't working, there are a couple of things to check. Ensure that the pressure set on the pressure regulator is sufficient; increase it if necessary. Also, check the compressed air hose and tools for any leaks and replace them if needed.
R
rbennettAug 26, 2025
What to do if my Parkside Compressor starts but tools don't?
- D
  Deborah WilsonAug 26, 2025
  If your Parkside Compressor starts, pressure is indicated on the pressure gauge, but the tools aren't working, first check the compressed air hose and tools for leaks, replacing them if necessary. Also, the pressure set on the pressure regulator may be insufficient. Try increasing the set pressure using the pressure regulator.
P
Pamela StevensAug 28, 2025
How to troubleshoot a Parkside Compressor that won't start?
- P
  Phillip SwansonAug 28, 2025
  If your Parkside Compressor doesn't start, begin by checking the supply voltage, power plug, and socket-outlet to ensure they are functioning correctly. Also, make sure the extension cable isn't too long and uses sufficiently large wires. Avoid operation below +5° C. If the motor is overheated, allow it to cool down and address the cause of overheating.
M
Michael HessAug 31, 2025
What to do if Parkside Compressor starts but no pressure?
- P
  paul54Aug 31, 2025
  If your Parkside Compressor starts but isn't building pressure, check the drain plug for condensation water and tighten it by hand. Inspect the screw's seal and replace it if needed.
M
Melissa DavidSep 2, 2025
Why is my Parkside Compressor starting but not building pressure?
- D
  dickersonnicoleSep 2, 2025
  If your Parkside Compressor starts but isn't building pressure, the seals might be damaged. A service center should check the seals and replace any damaged ones.
C
Craig WilliamsSep 4, 2025
Why won't my Parkside Compressor start in cold weather?
- M
  Max MorrisSep 4, 2025
  If your Parkside Compressor doesn't start due to low outside temperature, remember to never operate it when the outside temperature is below +5° C.
L
Lori ThompsonSep 7, 2025
What to do if Parkside Air Compressor starts but tools don't?
- S
  Samuel CunninghamSep 7, 2025
  If your Parkside Air Compressor starts but the tools aren't working, first check the compressed air hose and tools for leaks, replacing them if necessary. Also, a quick-lock coupling may have a leak. Finally, make sure the pressure regulator is set to a sufficient pressure and increase it if needed.
L
Leslie RaymondSep 10, 2025
How to troubleshoot Parkside Air Compressor that won't start?
- C
  Cristina GonzalesSep 10, 2025
  If your Parkside Air Compressor doesn't start, begin by checking the supply voltage, power plug, and socket-outlet. Also, ensure the extension cable isn't too long and has adequately sized wires. Avoid operating the compressor below +5° C, as low outside temperatures can prevent starting. Lastly, allow the motor to cool down, addressing any overheating causes.

Parkside PKO 270 A4 Specifications

General

Brand	Parkside
Model	PKO 270 A4
Category	Air Compressor
Language	English

Summary

Introduction and Device Overview

Manufacturer and Customer Information

Details about the manufacturer, customer greeting, and liability notes.

Operating Manual Recommendations

Advice on reading and following instructions for safe and efficient operation.

Device Description

Identification of the compressor's components with reference to figures.

Scope of Delivery

List of items included in the product packaging and initial inspection steps.

Intended Use and Safety Information

Intended Use

Defines the proper application of the compressor and limitations for high-consumption tools.

General Safe Work Practices

Guidelines for maintaining an orderly workspace and considering environmental factors.

Personal Safety and Tool Handling

Focuses on protection from electric shock, child safety, tool care, and proper clothing.

Operational Safety and Maintenance

Covers cable checks, avoiding inadvertent starting, and the importance of professional repairs.

Noise and Hearing Protection

Emphasizes wearing hearing protection due to noise exposure and potential hearing loss.

Specific Safety Guidelines and Technical Data

Power Cable and Installation Safety

Safety concerning power cable replacement and compressor installation location and setup.

Tire Inflation and Hose Safety

Procedures for tire inflation and crucial safety measures for air hoses.

Compressed Air and Paint Spraying Safety

Specific warnings and precautions for using compressed air tools and paint spraying operations.

Pressure Vessel and Residual Risk

Guidelines for safe pressure vessel operation and awareness of residual risks.

Technical Data

Specifications including mains connection, motor rating, pressure, capacity, and noise levels.

Pre-Operation Checks and Assembly

Before Starting the Equipment

Checks for mains connection, transit damage, installation environment, and oil level.

Assembly and Operation

Instructions for assembling components, connecting mains, and operating controls.

Electrical Connection and Safety

Information on motor connection, regulations, and warnings about damaged cables.

Maintenance, Troubleshooting, and Warranty

Electrical Connection Details

Specifications for AC motor, mains voltage, extension cables, and professional repair requirements.

Cleaning and Maintenance

Procedures for cleaning the equipment, maintaining the pressure vessel, and safety valve checks.

Oil Level and Change Procedures

Guidance on checking and changing the compressor oil, including oil type and intervals.

Intake Filter Cleaning and Storage

Instructions for cleaning the intake filter and proper storage of the compressor.

Disposal, Recycling, and Transport

Information on environmentally friendly disposal, recycling, and safe transport of the unit.

Troubleshooting Common Issues

Identification of common faults, their possible causes, and recommended remedies.

Warranty Certificate and Service

Details on guarantee terms, exclusions, claim procedures, and service contact information.

Declaration of Conformity

Conformity Statement

Manufacturer's declaration of conformity with EU directives and standards for the article.

Product Identification and Standards

Details on applicable directives, standards, noise measurements, and manufacturer information.

Related product manuals

Parkside PKA 20-Li A1

69 pages

Parkside PKOD 5010 A1

66 pages

Parkside PAK 20-Li C3

33 pages

Parkside PAK 20-Li B2

214 pages

Parkside PKO 270 A4 User Manual

Table of Contents