EasyManua.ls Logo

Parkside PLH 2800 B2 - User Manual

Parkside PLH 2800 B2
50 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PLH 2800 B2
ELEKTRO-LEISEHÄCKSLER
Originalbetriebsanleitung
GARDEN SHREDDER
Translation of original operation manual
IAN 315130
GB IE NI
GB IE NI

Table of Contents

Questions and Answers

  • G
    garciakerryAug 3, 2025
    What to do if Parkside Paper Shredder motor is not running?
    • D
      Douglas LopezAug 3, 2025
      If the motor of your Parkside Paper Shredder isn't running, there are several potential causes. First, ensure the collector box is correctly attached and the safety switch is in the ON position. Check the overload protection switch and reset it by pushing it down. Also, verify that the shredder is receiving power by checking the socket, cable, lead, and plug for any damage. If the safety switch on the collector box is not properly in place, move it to the ON position.
  • S
    Sydney Reeves DDSAug 13, 2025
    Why Parkside PLH 2800 B2 shredding does not work?
    • J
      jay96Aug 13, 2025
      If your Parkside Paper Shredder isn't shredding, it could be due to several reasons. One possibility is that the cylinder blade is running in reverse; if so, change the rotational direction using the function switch. Another reason might be that the shredding material is too soft; try inserting wood or dried branches. Finally, the cylinder blade may be jammed. If this is the case, you will need to free up the jam.
  • L
    Leonard GonzalezAug 23, 2025
    What to do if Parkside PLH 2800 B2 Paper Shredder shredding material comes out in chains?
    • M
      Martin PerezAug 23, 2025
      If the shredding material from your Parkside Paper Shredder is coming out in chains, the pressure plate may be incorrectly adjusted. Readjust the pressure plate.

Summary

Introduction and Product Overview

Intended Purpose

Specifies the product's designed use for shredding garden materials like branches and cuttings.

Safety Precautions

Symbols and Safety Notes

Explains hazard, precaution, and notice symbols and general safety guidelines for operation.

Personal Protection and Operation

Details protective gear and crucial measures for operating the shredder safely.

Electrical Safety

Extension Cable Usage

Guidelines for selecting and using outdoor-approved, splash-resistant extension cables.

Installation Manual

Unpacking

Assembling the Shredder

Step-by-step guide for assembling the shredder components, including wheels and unit.

Operation Start-up

Operation

Switching On;Off and Controls

Collector Box Handling

Overload and Restart Protection

Working Methods

General Working Instructions

Shredding the Material

Freeing Up a Jam

Procedures for clearing jams, including overload switch reset and blade access.

Adjusting the Pressure Plate

Running-in and Adjustment

Maintenance and Cleaning

General Cleaning and Servicing

Trouble shooting

Exploded View

Guarantee Information

Parkside PLH 2800 B2 Specifications

General IconGeneral
Security levelP-4
Working width220 mm
Noise level70 dB
Overheating protectionYes
Automatic start/stop functionYes
Reverse functionYes
Power Consumption280 W
Voltage220-240 V
Frequency50 Hz
Can shredPaper, credit cards

Related product manuals