What to do if my Parkside PWH 2800 B2 motor does not start?
If the motor of your Parkside Paper Shredder doesn't start, there could be a few reasons. First, make sure the collecting container is correctly inserted and the safety switch is engaged. Second, the motor might be overloaded; try switching the roller shredder on again. Finally, check the mains voltage; have the socket, cable, lead, and plug inspected by a qualified electrician.
Why is garden waste not being drawn into my Parkside PWH 2800 B2 Paper Shredder?
If the garden waste is not being drawn into your Parkside Paper Shredder, it might be due to a few reasons. One potential cause is that the cutting roller is moving counterclockwise; in this case, switch the direction of rotation. Another reason could be that the chopped material is too soft; try pushing the material in with a special plug designed for roller shredders. Lastly, the cutting roller could be blocked; try to unblock it.
How to fix chopped material hanging together like a chain in Parkside Paper Shredder?
If the chopped material from your Parkside Paper Shredder is hanging together like a chain, the pressure plate may not be adjusted correctly. Try readjusting the pressure plate.
Explanation of safety-related symbols including warnings and PPE.
Explanation of symbols for sound level, CE, and protection class.
Guidance on proper use, user age restrictions, and general safety practices.
General safety measures for electric shock, injury, and fire risks.
Essential preparation steps including PPE and safe operating environment.
Instructions for connecting the extension cable and understanding the status LED.
Details on switches, roller rotation, and overload protection mechanisms.
Guidelines for working notes, unblocking, emptying container, and adjusting pressure plate.
Instructions for handling and checking damaged electrical connection cables.
Information regarding AC motor specifications and extension cable requirements.
Step-by-step guide for replacing the cutting roller and pressure plate.
General| Security Level | P-4 |
|---|---|
| Working Width | 220 mm |
| Overheating Protection | Yes |
| Automatic Start/Stop Function | Yes |
| Reverse Function | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Shred Type | Cross-cut |
| Particle Size | 4 mm |
To Next Page
