Parkside PLS 48 D2 Instructions For Use

22 PLS 48 D2
| GB | IE
Children must never play with the device. Cleaning
and user maintenance must never be carried out by
children without supervision.
 If the mains supply cable of this device gets dama
-
ged, it must be replaced by the manufacturer or its
customer service or by a similarly qualified person
in order to avoid hazards.
CAUTION DANGER OF ELECTRIC
SHOCK! Do not use the soldering
station if the handle, power
cable or plug are damaged.
Never open the device!
 RISK OF BURNS! Before using, check that the tool
tip is properly attached to the device. Never touch
the heated soldering tip or the molten solder. There
is a risk of burns. The device must be allowed to
cool down before changing, cleaning or checking
any components. The hot tool tip and its mounting
must not come into contact with skin, hair, etc. Risk
of burns.
 After working, allow the soldering iron to cool down
only in the air. Under no circumstances quench with
water!
 CAUTION! DANGER OF FIRE! Only use the
multifunctional holder to put down the hot soldering
iron.

Parkside PLS 48 D2 Specifications

General

Brand	Parkside
Model	PLS 48 D2
Category	Soldering Gun
Language	English