29 PLS 48 D2
GB | IE |
Cleaning and maintenance
WARNING! RISK OF INJURY! Always
unplug the device from the mains
socket and allow it to cool down before
performing any work on the device.
Clean the device after completing the work.
Use a cloth and a mild detergent if required to clean the housing.
Never use sharp objects, petrol, solvents or cleaners that can damage
plastic.
Do not allow liquids to enter the inside of the device.
Note
f Spare parts (such as soldering tips) can be ordered from
our service hotline.
Disposal
Device disposal
The packaging is made of environmentally friendly
materials, which you can dispose of at local recycling
points.
Do not throw power tools into your household
waste!
According to the European Directive 2012/19/EU, used power tools must
be collected separately and recycled in an environmentally sound manner.
You can find out the possibilities of disposing of the used device at your
municipal or city administration.
To Next Page
Loading...
Need help?
General
