To Next PageTo Next PageWhat to do if the measurement is obviously too high or low on Parkside PMSHM 2 A1?
If you observe that the measurement is significantly off, ensure the device is configured for the correct material. Also, verify that the measuring pins are making proper contact with the surface. Repeating the measurement can also help.
Why does the display read 'Lo' or 'Hi' on my Parkside PMSHM 2 A1?
The 'Lo' or 'Hi' reading indicates that the measurement is either beyond the maximum range or below the minimum range of the device.
Why can I barely see the number on the display of my Parkside Measuring Instruments?
If the display is dim, the batteries may be running low. Replace the batteries.
General| Model | PMSHM 2 A1 |
|---|---|
| Type | Moisture Meter |
| Voltage | 9V |
| Resolution | 0.1% |
| Display | LCD |
| Measuring range (building material moisture) | 1.5% - 33% |
| Operating temperature | 0°C - 40°C |
Explains symbols used in the manual for clarity.
Specifies the product's purpose and limitations for measuring moisture.
Identifies and explains the physical components of the moisture meter.
Provides detailed specifications like operating voltage, accuracy, and temperature range.
Lists the items included in the product packaging.
Outlines essential safety precautions for using the product.
Details critical safety measures for handling batteries to prevent harm or explosion.
Guides on initial preparation, including battery installation and checks.
Explains how to turn on the device and perform moisture measurements.
Describes battery status, temperature display, and measurement freezing.
Explains how to reset the device for calibration or troubleshooting.
Provides solutions for potential issues encountered during product use.
Covers product maintenance, proper storage, and responsible disposal methods.
Details warranty terms, claim procedures, and customer service contacts.
