To Next PageTo Next PageWhat to do if the LCD display 1 is blank on my Parkside Measuring Instruments?
If the LCD display is blank, the device might be switched off, so switch it on. Alternatively, the battery may be inserted incorrectly; remove it and reinsert it with the correct polarity. A low battery voltage could also be the cause, so try inserting a new battery.
General| Type | Digital Multimeter |
|---|---|
| Display | LCD |
| Wood Moisture Measurement Range | 5% to 50% |
| Operating Temperature | 0°C to 40°C |
| Measurement Range | Depends on measurement type |
| Resolution | Varies depending on the measurement and range; see manual for details |
Details on the purpose and recommended usage of the operating instructions.
Specifies the intended use of the device and limitations.
Explains the meaning of warning symbols and signal words used in the manual.
General safety guidelines for using the device and handling it.
Specific safety advice for battery installation, use, and disposal.
Instructions for verifying all items are present in the package.
Step-by-step guide for battery installation and replacement.
Instructions for powering the device on and off.
How to choose between different measurement modes like degrees or percent.
Procedure for setting a reference point for angle measurements.
How to freeze the current measurement value on the display.
Information on how the display backlight operates and its duration.
Explanation of arrow indicators on the display showing inclination direction.
Guide on how to recalibrate the device if necessary.
Instructions for disposing of the device according to regulations.
Guidance on how to dispose of packaging materials responsibly.
Specific safety advice for safe and environmentally sound battery disposal.
Detailed technical data including voltage, measurement units, range, and accuracy.
Information about the warranty terms and conditions from the manufacturer.
Contact information for customer service and support.
Details of the product importer, noting it is not the service address.
