1
PMST 100 A1
GB
IE
CY
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General Power Tool Safety Warnings ................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 4
5. Service .................................................................. 4
Appliance-specific safety instructions for jigsaws .................................... 5
Original accessories/auxiliary equipment ......................................... 5
Information on saw blades ..................................................... 5
Operation .......................................................5
Fitting/changing the saw blade ................................................. 5
Fitting the rip fence ........................................................... 6
Handling ........................................................6
Setting the cutting angle ....................................................... 6
Switching the appliance on/off ................................................. 6
Setting the stroke rate ......................................................... 6
Maintenance and cleaning ..........................................6
Warranty ........................................................7
Service ..........................................................7
Importer ........................................................7
Disposal .........................................................7
Translation of the original Conformity Declaration ......................8