19
caused by improper use or incorrect oper-
ation.
The device is part of the X12VTEAM
series and can be operated with bat-
teries of the X12VTEAM series. Bat-
teries of the X12VTEAM series may
only be charged using chargers of the
X12VTEAM series.
Scope of delivery/
accessories
Unpack the device and check that
everything is present.
Dispose of the packaging material prop-
erly.
• Battery
• Battery charger
• Translation of the original instructions
Overview
The illustrations for the
device can be found on the
front fold-out page.
1 Battery
2 Battery release
3 Battery charger
4 Control display, green
5 Control display, red
6 Charging slot
Technical data
Battery (Li-Ion) .......... PAPK 12 A4
Rated voltage U .............................12V ⎓
Number of battery cells ........................... 3
Capacity .......................................... 2,0Ah
Energy ..............................................24Wh
Charging time ......................................1 h*
Temperature ................................... ≤50 °C
– Charging ................................4 – 40°C
– Operation ......................... −20 – 50°C
– Storage .................................. 0 – 45°C
* The specified charging time applies to
the charger supplied.
Battery charger .........PLGK 12 A3
Rated voltage U 220–240V∼, 50-60Hz
Rated output P ...................................50W
Protection class .....⧈II (double insulation)
Device fuse ........................................... T2A
Output voltage ....................................12V
Output current ....................................2.4A
Charging time
We recommend that you only use this
charger to charge the following re-
chargeable batteries:PAPK 12 A3,
PAPK 12 A4, PAPK 12 B3, PAPK 12 B4,
PAPK 12 D1
We recommend that you only charge
this rechargeable battery with the
following chargers:PLGK 12 A2,
PLGK 12 A3, PLGK 12 B2, PDSLG 12 A1,
PDSLG 12 A2
Charging time
(min.)
PLGK 12 A3
PAPK12A1
PAPK12A2
PAPK12A3
PAPK12A4
60
PAPK12B2
PAPK12B3
PAPK12B4
120
PAPK12D1 150
The charging time is influenced by factors
such as the temperature of the environ-
ment and the battery, as well as the mains
voltage applied, and may therefore devi-
ate from the specified values.