39
2. Adjust the attachment to the desired
height.
3. Tighten the clamping screw (43)
again.
Mounting accessories on the scale
(15) (Fig.B)
1. Guide the desired accessory (Parallel
guide (16), Circle cutter (28)) from be-
low to the scale (15).
2. Secure the accessory with the screw
(44).
Attachment tool
Function Attachment tool
Speed
level* ≤ Use
Protru-
sion a
[mm]
Drilling HSS drill (22) 6 Woodworking 20
Plastic brush (30) 3 Cleaning on plastic
or steel
9–15Polishing, cleaning
Felt polishing disc
(large) (32); Felt pol-
ishing disc (small)
(33)
6 Machining various
metals and plastics,
especially precious
metals such as gold
or silver
12–18
Cleaning, sanding/
grinding at low pres-
sure
Polishing sander (31) 6 Cleaning/sanding
on wood, plastic and
soft metals such as
aluminium, copper
and brass
9-15
Grinding disc (35) 6 12–18
Grinding belt (40) 6 10
Sandpaper (36) 6
Sanding work on
wood, fine work on
hard materials such
as alloy steel
12–18
Silicon carbide moun-
ted point (38)
6 Grinding work on
stone, glass, ceram-
ics, porcelain and
non-ferrous metals
10
Sanding/Grinding
Corundum mounted
point (37)
6 Grinding work on
stainless steel, alu-
minium, brass and
copper
10
Cutting Cutting disc (29);
Cutting disc (small)
(34)
6 Machining metal,
plastic and wood
12–18
To Next Page
Loading...
