Parkside PPS 200 C2 - English; Default Chapter; Table of Contents

PPS 200 C2
GB
│
IE
│
NI
│
CY
│
1 ■
Contents
Introduction ............................................................2
Intended use ........................................................................2
Features ...........................................................................2
Package contents ....................................................................2
Technical data ......................................................................2
General power tool safety warnings .......................................3
1. Work area safety ..................................................................3
2. Electrical safety ...................................................................3
3. Personal safety ....................................................................4
4. Power tool use and care ............................................................4
5. Service ..........................................................................5
Appliance-specific safety instructions .....................................................5
Original accessories/auxiliary equipment .................................................5
Operation ............................................................. 6
Switching on and off .................................................................6
Fitting the sanding sheet ...............................................................6
Extracting dust ......................................................................6
Work instructions, tips and tricks ........................................................7
Maintenance and cleaning ................................................ 7
Disposal ............................................................... 8
Kompernass Handels GmbH warranty .....................................8
Service ................................................................ 9
Importer ..............................................................9
Translation of the original Conformity Declaration ...........................10