To Next PageTo Next Page
Need help?Do you have a question about the Parkside PSBS 24 A1 CORDLESS HAMMER DRILL and is the answer not in the manual?
General| Voltage | 24 V |
|---|---|
| Max Torque | 50 Nm |
| Weight | 1.67 kg (without battery) |
| Impact Rate | max. 28800 bpm |
| Battery Type | Lithium-ion |
| Chuck Size | 13 mm |
| Torque | 50 Nm |
| Chuck Capacity | 13 mm |
Keep working area clean and well lit. Avoid working in potentially explosive environments. Keep children away.
Ensure mains plug matches socket. Avoid touching earthed surfaces. Keep mains lead away from heat and sharp edges.
Remain alert, proceed with caution. Do not use if tired or under the influence of drugs/alcohol.
Do not overload. Use correct tool. Ensure switch is not defective. Pull plug before adjustments.
Charge with recommended charger. Use only supplied battery units. Store battery units away from metal objects.
Screw the additional handle onto the left-hand or right-hand side of the appliance.
Charge battery pack before first use. Charging takes about 90 minutes. Red LED indicates charging.
Turn appliance 180 degrees to remove. Press unlocking button and push battery pack out.
Press the battery charge state test button. Remaining capacity is shown on the LED display.
First gear: approx. 500 min-1 speed, high torque. Second gear: approx. 1800 min-1 speed, lower torque.
Use the torque preselection ring to set torque. Clutch decouples drive when torque is reached.
Turn the setting ring to the correct symbol for drilling/screwing or impact drilling.
Spindle lock allows opening the chuck by turning it. Turn chuck to lock inserted tool securely.
Press and hold the ON/OFF switch to start. Release to switch off. Variable speed regulator.
Increase speed by increasing pressure on ON/OFF switch. Reduce speed by reducing pressure.
Push the direction of rotation switch fully to the right or left to reverse the direction.
Advice on drill bit types for metal, stone, and wood, and using auger or forstner bits.
The device is maintenance-free. Clean exterior with a dry cloth. Never open the device.
Have repairs done by qualified personnel using original manufacturer parts for safety.
3-year warranty from purchase date. Retain receipt. Covers material/manufacturing defects.
Dispose of packaging environmentally. Do not dispose of electrical appliances in household waste.
