Parkside PSS 65 A1 Translation Of The Original Instructions

4 9
N I
I E
CY
G B
Translation of the original
EC declaration of conformity

Sharpening station
model PSS 65 A1
Serial number
201711000001 - 201711375099
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 61029-1:2009/A11:2010 • EN ISO 12100:2010 • EN 13236:2010/A1:2015
EN 55014-1:2006/A2:2011 • EN 55014-2:2015
EN 61000-3-2:2014 • EN 61000-3-3:2013 • EN 62321:2009
This declaration of conformity is issued under the sole responsibility of the manufactu-
rer:
Christian Frank
Documentation Representative
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
D-63762 Großostheim,
Germany
15.11.2017
* The object of the declaration described above satises the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.

Parkside PSS 65 A1 Specifications

General

Power	650 W
Rated input power	650 W
No-load speed	500 – 3, 000 rpm
Max. cutting depth in wood	65 mm
Max. cutting depth in steel	8 mm
Cable length	2 m
No-load stroke rate	0 - 3000 min⁻¹
Bevel cut left/right	45°
Sanding disc diameter	Not applicable