Parkside RAPIDFIRE - EC Declaration of Conformity

Volker Lappas
Documentation Representative
Translation of the original EC declaration of conformity
We hereby conrm that the
Cordless screwdriver
Design Series Rapidre
Serial Number
201605000001 - 201607245000
conforms with the following applicable relevant version of the EU guidelines :
2006/42/EC • 2014/30/EU • 2014/35/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 60335-1:2012+A11:2014 • EN 60745-1:2009+A11:2010
EN 60745-2-2:2010 • EN 62233:2008
EN 55014-1/A2:2011 • EN 55014-2/A1:2001+A2:2008 • EN 62471:2008
EN 61000-3-2:2014 • EN 61000-3-3:2013 • EN 60335-2-29/A2:2010
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline:
Sound power level
guaranteed: 76 dB(A)
measured: 73.2 dB(A)
Compliance evaluation process carried out in accordance with
Appendix V, 2000/14/EC
This declaration of conformity (16)** is issued under the sole responsibility of the
manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim, 27.07.2016
Germany
GB
* The object of the declaration described above satises the provisions of Directive 2011/65/EU
of the European Parliament and the Council of 8 June 2011 on limiting the use of certain harmful
substances in electrical and electronic appliances.
** The last two digits of the year in which the CE marking was a󰀩xed.
IE NI
56