EasyManua.ls Logo

PARKZONE Ember 2 - Step 4: Flying Your Ember 2; Seek Assistance from Experienced Pilot

PARKZONE Ember 2
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Selecting a Flying Site
Always choose a wide-open space for ying your ParkZone Ember 2.
It is ideal for you to y in an indoor location with a oor area of 40’x40’
and a minimum ceiling height of 20 feet. We suggest that rst ights are
done in a larger area, such as a basketball court or gymnasium.
If you choose to make your ights outdoors, the conditions MUST be
COMPLETELY CALM. The Ember 2 weighs less than 1 ounce and can
easily be blown away. If you choose to y outdoors, remember to always
keep the plane upwind from you to avoid yaways.
Make certain that you do not y near trees, buildings or other areas that
can restrict your view or interfere with your ying.
Seek Assistance from an Experienced Radio Control Pilot
VERY IMPORTANT
The 3-channel control system is designed for the experienced radio
control pilot and is not intended for the rst time ier. It is best to
have HobbyZone Zone 2 experience. First-time pilots of the ParkZone
Ember 2 should seek the assistance of an experienced RC pilot. Crash
damage is not covered under the warranty.
1. Make certain that the aircraft battery is fully charged.
2. Turn on the transmitter.
3. Plug in the aircraft battery.
4. Test the motor and surface controls.
5. While holding the transmitter in one hand, push the throttle stick to
full throttle (up) with your thumb.
6. Launch using light force. Keep the wings level. Do not throw it up
or down. Point it level (parallel) with the ground when releasing.
Step 4 – Flying your Ember 2
Step 5 – Hand Launching the Ember 2

Related product manuals