4
Installing the Transmitter Batteries
Your ParkZone Ember 2 aircraft comes with a fully proportional 4+
channel radio system that includes digital trims.
1. Insert the 4 AA batteries that are included with the package into
the transmitter.
2. Turn the switch on to ensure the batteries have been installed
correctly. When the batteries are installed correctly, the LED on the
transmitter should glow brightly. When the transmitter makes a
repeated “beep” sound, it is time to replace the transmitter
batteries.
Installing the Landing Gear
Attach the main landing gear by sliding the gear into the lower slot
located on the front wing mount.
Step 2 – Functional Tests
To Next Page
Loading...
