PARKZONE Ember 2 - Transmitter Control Identification

6
Transmitter Control Identification
Note: Each time before you fly you should ALWAYS turn the
transmitter on before connecting the flight battery to the ESC unit.
After each flight, be sure that you always disconnect the flight battery
from the ESC unit before powering the transmitter off.
Mode 2
Mode 1
Rudder/Throttle
Functions
Rudder/Elevator
Functions
Throtlle Trim Buttons
Elevator Trim Buttons
Elevator Trim Buttons
Throttle Trim Buttons
Aileron Trim Buttons
Aileron Trim Buttons
Aileron/Elevator
Functions
Aileron/Throttle
Functions
Rudder Trim Buttons
Rudder Trim Buttons