EasyManuals Logo

Parrot BEBOP-PRO 3D MODELING User Manual

Parrot BEBOP-PRO 3D MODELING
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
ENGLISH
FLIGHT CONDITIONS
TO BE COMPLIED WITH
5 Conditions to be complied with, without fail.
1. Do not fly Parrot Bebop 2 at night.
2. Check the weather to ensure good flight and
visual conditions. Do not use Parrot Bebop 2 if it is
raining/snowing, if there is fog, or winds in excess
of 8 meters per sec or 30 km/hr.
3. Do not fly the drone over water.
4. Make sure you have enough space available for
Parrot Bebop 2 takeoffs and landings. Check the
piece of land has no obstacle that might interfere
with flight phases or prevent visual contact.
5. Make sure the flight altitude programmed in
Pix4Dcapture (entered in relation to takeoff point) is
sufficient to clear obstacles in the surrounding area.
VERIFICATION OF PARROT
BEBOP 2
Make sure that Parrot Bebop 2 has detected the GPS
signal in FreeFlight Pro or Pix4Dcapture.
Make sure the Parrot Bebop 2 propellers are properly
mounted and secured.
Make sure the Parrot Bebop 2 battery is charged.
Make sure you are in a wide open space.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parrot BEBOP-PRO 3D MODELING and is the answer not in the manual?

Parrot BEBOP-PRO 3D MODELING Specifications

General IconGeneral
BrandParrot
ModelBEBOP-PRO 3D MODELING
CategoryDrones
LanguageEnglish

Related product manuals