• Select where you want to place your Parrot BOOMBOX in the room.
Avoid placing it close to devices using wireless technologies,
such as WIFI routers, micro-wave ovens, etc., to prevent interference
from adversely affecting the sound quality of your Parrot BOOMBOX.
WARNING: Do not block any ventilation openings located at the back
of the apparatus.
• Connect the mains cable supplied to the appropriate socket on
your Parrot BOOMBOX, then plug the cable into an electrical socket.
• When switched on, the LED on your Parrot BOOMBOX flashes
red / blue. When the device is ready to be used, the LED on your
system only flashes blue.
CONNECTING ThE PARROT BOOMBOX
TO AN AudIO PlAYER
An audio player is the device you use to store your MP3 music files
and start playing these files. An audio player can therefore be a mobile
phone, PC, etc. However, the audio player must be equipped with a
jack connector or the Bluetooth profile A2DP. For more information,
visit our website at www.parrot.com.
US EU UK
uSinG an auDio player via BLuetooth
If you are using a Bluetooth-enabled audio player with your Parrot
BOOMBOX you must first of all pair the two devices. This phase allows
the two devices to exchange data in order to establish a connection
Pairing with a Bluetooth audio player
For security reasons, the two devices must be paired. Pairing is used
to authenticate the devices that you are going to use
with the Parrot BOOMBOX: an audio player that has not been paired
cannot be used with the system. During the pairing phase,
the user must have actual access to the device.
Press the Configuration button.
The Parrot BOOMBOX LED starts flashing: the device is ready
to be paired.
Use your audio player’s Bluetooth menu to search for the
peripherals (refer to the manual for your audio player or to our
website at www.parrot.com).
When the search is complete, select «BOOMBOX».
You are prompted to enter a PIN. Enter «0000» in your audio player.
You can now use your Parrot BOOMBOX with your Bluetooth audio
player. To play your music files from your audio player, refer to the
chapter entitled «Streaming Audio Function» in this guide.
NB: ensure that the default code for your audio player is «0000». For further
information, refer to your audio player’s user guide.
•
•
•
•
•
To Next Page
Loading...
Need help?
Audio Specifications
Memory
Power
