SOFTWARE uPdATES vIA BluETOOTh
You can update the software of your Parrot BOOMBOX by Bluetooth.
Upgrading offers you new features and improves compatibility
with a larger number of phones. This operation is carried out via
Bluetooth using a PC equipped with Bluetooth technology.
Updates are performed via the Parrot Flash Update Wizard.
You will find this software, along with instructions on how to use it
in the Support section of our website at www.parrot.com
TROuBlEShOOTING
I used a Cinch audio cable
to connect my audio player,
but I get no sound.
- Check that the Cinch audio cable
is properly plugged in to the Parrot
BOOMBOX and audio player.
- Check that there is no Bluetooth
connection with an audio player.
The Bluetooth connection will take
priority over the Cinch connection.
My Parrot BOOMBOX makes
a noise when I use
a Cinch audio cable.
- Check that the Cinch audio cable
is properly plugged in to the Parrot
BOOMBOX and audio player.
I am using my PC as
a Bluetooth audio player,
but there is no sound coming
from my Parrot BOOMBOX.
- Check that the «Sound
playback» option is set to «High-
quality Bluetooth Audio».
You can find this option
by selecting Start/Settings/Control
panel/Sound and Audio Devices/
Audio on your computer.
When I watch a video,
the sound from the Parrot
BOOMBOX is not synchronised
with the image.
- Use the Parrot Audio
Configuration Tool to check
that your system’s audio delay
is correctly configured
for this type of use.
Problem Solution
No sound is coming through
the Parrot BOOMBOX.
- Check that the device
is connected properly.
- Check that your device supports
the Bluetooth A2DP profile and
the source role.
I cannot connect my audio player
to the Parrot BOOMBOX.
- Hold down the Configuration
button on the Parrot BOOMBOX
for two seconds, then restart
the search and connect.
To Next Page
Loading...
Need help?
Audio Specifications
Memory
Power
