Need help?Do you have a question about the Particle Measuring Systems LASAIR II 510A and is the answer not in the manual?
General| Number of Channels | 6 |
|---|---|
| Light Source | Laser Diode |
| Communication | RS-232 |
| Display | LCD |
| Power | 100-240 VAC, 50/60 Hz |
| Sample Time | 1 second |
Introduces the Lasair II particle counter, its purpose, and how it counts particles.
Guides through unpacking the instrument and connecting power and battery.
Explains the front panel layout, control keys, and screen navigation guidelines.
Guides on setting up sample parameters and starting the sampling process.
Explains the setup process, enabling edit mode, and using softkey functions.
Details setting up sampling parameters, units, delays, and managing location names.
Covers setting particle and analog alarms, and print-on-alarm features.
Guides on collecting sample data and viewing it on main or data table screens.
Introduces various communication protocols like TCP/IP, Web Server, and Serial Interface.
Guides on setting up Ethernet and Serial communication parameters for connectivity.
Explains using web browsers and Facility Net for instrument control and data management.
Details features, supported standards (ISO, EU-GMP, FS, BS), and mode-specific operations.
Discusses Facility Net, web browser, network issues, and data erasure problems.
Provides steps for setting up TCP/IP addresses for direct and Ethernet network connections.
Provides warnings in multiple languages regarding laser product classification and radiation exposure.
To Next Page
