Need help?Do you have a question about the Partner K700 ACTIVE III and is the answer not in the manual?
Explains symbols found on the power cutter itself.
Explains symbols used within the operator's manual.
Crucial safety warnings regarding modifications and material handling.
Details essential protective gear required for safe operation of the power cutter.
Explains the safety features integrated into the power cutter and their importance.
Describes the vibration damping system designed to improve user comfort and reduce fatigue.
Instructions for using the stop switch to safely turn off the engine.
Warnings and checks related to the hot muffler and its exhaust function.
Importance of the blade guard and checks for damage or correct fitting.
Essential general safety rules for operating the power cutter.
Guidance on safely storing and transporting the power cutter.
Precautions for handling fuel, mixing, and storage to prevent fire and explosion.
Basic safety rules to follow during general operation of the power cutter.
Specific safety advice and distance requirements when performing cutting operations.
Detailed steps and advice for proper and safe cutting techniques.
Information on water cooling for blades, its benefits, and drawbacks.
Explains blade vibration, kickback, and methods to avoid these hazards.
Describes "pull in" and "pinching/rotation" phenomena and how to avoid them.
Notes on the use and storage of abrasive discs, including water incompatibility.
Instructions on how to check and ensure the drive shaft speed is within safe limits.
Guidance on general care, power cutter storage, and handling of cutting blades.
Overview of available cutting blade types: abrasive discs and diamond blades.
Details on abrasive discs for concrete and metal, including material and water cooling.
Information on blades designed for portable power cutters and compatibility.
Notes on cutting blades designed for stationary equipment or attachments.
Checks for the blade guard and ensuring the cutting blade is not damaged.
Information on diamond blades, their characteristics, materials, and water cooling.
Instructions for using diamond blades correctly and actions to avoid for safety.
Identifies key components of the power cutter using a diagram and labels.
Procedures for checking the drive shaft threads and flange surfaces for damage.
Step-by-step guide for securely fitting the cutting blade onto the power cutter.
Instructions on how to properly adjust the blade guard for optimal protection.
Guidance on mixing petrol and two-stroke oil for the correct fuel mixture.
Safe steps for refuelling the power cutter, including precautions and checks.
Detailed procedure for starting the power cutter when the engine is cold.
Instructions for starting the power cutter when the engine is already warm.
How to safely stop the power cutter's engine using the stop switch.
Steps for adjusting the drive belt tension for optimal performance.
Procedure for replacing the drive belt on the power cutter.
Notes on the belt pulley and clutch, and maintenance precautions.
Information on carburettor jets, operation, and final idling speed adjustment.
Guidance on checking and replacing the fuel filter.
Instructions for cleaning, oiling, and replacing the air filter for engine health.
How to check and clean the water valve and water filter.
Procedures for replacing starter cords, recoil springs, and fitting the starter.
How to inspect, clean, and check the spark plug gap for optimal function.
Checks and precautions related to the muffler's condition and function.
Importance and procedure for cleaning the cooling system to prevent overheating.
Routine checks to perform daily for safe operation and upkeep.
Tasks to perform weekly to maintain the power cutter's condition.
Less frequent checks for wear and tear on key components.
Details on engine volume, bore, stroke, speed, and ignition system.
Information on fuel capacity, carburettor type, and overall weight.
Data on sound power, sound pressure, and vibration levels measured according to standards.
Details regarding cutting blade sizes, gear ratios, and maximum peripheral speeds.
Compliance statement regarding EU directives for machinery, EMC, and noise emissions.
To Next Page
General