PartySpace VEGA - Determining the Anchoring Points

27
VEGA  MANUAL
EN
1. Determine the first centre point of the double star tent. Place one of the rings of the
measuring rope where the first centre point of the double star tent is to be located and
anchor this point temporarily with a peg.
2. Form a triangle with the measuring rope and determine where the first 2 ground anchors
of the first side of the tent should be.
3. Ensure that the measuring rope is tight and is not doubled over anywhere in order to
correctly determine the anchoring points.
4. Put a plate for double anchoring under the two other rings of the measuring rope and
place a peg through both the ring of the rope as well as through one of the holes in the
plate. Hit the peg up to around 5 cm from the soil. These are the first two anchoring points.
DETERMINING THE ANCHORING POINTS
1.
3.
2.
4.