pasapair A019F-06KR - III. Control Setting; 1. Control Panel Operation

III. Control Setting
1.Control panel operation instructions
1
）
operation interface
：
2.
Mode Selection Button Fan
4. Increase Button
1.Power Button: Pressing the button to turn on and turn off the unit.
7.Sleep Mode: Simultaneously press increase and SPEED button to turn on Sleep mode，then the unit
will work on Energy-Saving and quiet mode.
2.
Mode Selection Button: In the case of power on, press this key to switch between cooling
→ fan → dry mode.
3.
DOWN: Pressing this button to decrease the temperature setting or set down the timer to
the required timer setting. This function is not available under FAN mode and
DEHUMIDIFYING mode.
4.
UP: Pressing this button to increase the temperature setting or set up the timer to the required
timer setting. This function is not available under FAN mode and DEHUMIDIFYING mode.
5.
Wind Speed Selection Button
1.Power Button
3.Decrease Button
5.
Fan Speed Selection Button
6.
Timer Button
:
1)In cooling mode and fan mode, pressing the button to select high, low wind speed
operation.
2)In dehumidifying mode, pressing the button is unavailable.
6.
TIMER: Pressing TIMER button to set the unit automatically turn ON or OFF. Use the + and -
buttons to adjust the time in hours.
TIMER SPEED
UP DOWN MODE
POWER
SLEEP
6 5 4
3 2 1
7