3. Introduction
The instrument GEA RM1 is a device designed and assembled by P.A.S.I. srl, a
leading company in Italy in the production of instruments for geology and geophysics.
This guide details the technical specifications and how to use the device. Please follow
these guidelines.
Contents
- Chapter 5, How to use, describes how to use the system from the hardware point
of view.
- Chapter 6, To begin with, describes how to perform some basic operations using
the Gea RM1 system and the Gea RM1-PC program, referring to the following
chapters of the manual and allowing the operator to begin to know and use the
system.
- Chapter 7, Description of the interface in standalone mode, describes the
operating mode of the system used in standalone mode, this means without the
connection to a PC, illustrating in detail all the features offered by the system.
- Chapter 8, Description of the Gea RM1-PC program, describes the operating
mode of the control program on the PC and the use of the system, illustrating in
detail all the features provided by the program and their interaction with the
system.
- Chapter 9, Software System Update, describes how to perform the update of the
systems software using the Gea RM1-PC program.
- Chapter 10, Appendix, shows the technical characteristics of the system and the
definition of the GPD owner format (Geophysics Pasi Data) used for storing on a
file the results of a measurement session.
To Next Page
Loading...
Need help?
General
