If the ignition does not take place within a reasonable time, the
machine will report the Failed Ignition error.
Check everything and start again
LIGHTING
FAILURE
ALARM
WORKING
MODIFY
SET
AMBIENT
TEMP.
MODIFY
SET
WATER
TEMP.
Ignition failure
At the end of the ignition phase, the stove goes into the normal
working mode.
Work time
To change the temperature ambient ,please, taste the P2
button and after regoulate it by button P2 and P1
Set temperature of ambient
To change the temperature ambient ,please, taste the P1
button and after regoulate it by button P2 and P1
Set temperature of water
To Next Page
Loading...