If the flue gas probe detects too high a temperature, the machine will go
into the alarm state as shown in the figure.
FUMI
BLACK OUT
ALARM
SOND
FUME
ALARM
HOT FUME
Alarm overtemperature sond
In this case , the stove goes into stop.
Alarm sond fume
This error occures when sond of fume is broken ( or dirty )
or there are a problem inside the motherbord.
Alarms
If some problems can be appare in the stove, it goes int
alarm Mode. In attached info about those.
Alarm Dislpay
ALARM HOT PELLET
Sond fume
High temp of sond fume
No pellet
No start
Stop electicity
Problem to fan
High temp of sensor of pellet
To Next Page
Loading...