If the line current fails, the machine goes into the black out state when
it returns.
If the lack is less than a predetermined time (i.e. about 10 sec.) The
machine will carry out all the routine checks and will continue, if the
working conditions are valid, in the state prior to the power failure, as
per the following diagram.
OPERATION
STATE
ALARM NO
FIRE
LACK OF
ELECTRICITY
in all other cases the stove goes into alarm
What's happen if...
The pellet doesn't light up
In the event of no ignition or no pellet supply, the stove will go into alarm.
Black - out
Actually state Duration New state
To Next Page
Loading...