If you purchase Pasmo soft ice cream machine with water cool, pls
correctly install tube according to manufacturer's guidance. No need
space for radiating, 2 tubes for input water and 1 tube for out of
water. Input water temperature <20 degree,the pressure of input water
>1 Mpa, if can not meet the demand, will be influence the refrigeration
(figure 4).
Before using machine,you need to read the operation manual and view
the operation video or be trained by technician. If machines are broken
due to changing the setting parameter personally,
PASMO will not Honor
warranty.
If you purchased your Pasmo soft ice cream machine with air cool,
you will need 11 inches for air input and 19 onces for air output, please
check below for space requirements for your model (such as S520F,
As shown in figure 3)
ＰＡＳＭＯ ＯＰＥＲＡＴＩＯＮ
03
(Figure 3) (Figure 4)
S318 S630 S850 S110 S230 S520 S970 S930
Direction of
radiating
Direction of
air input
Left side Left side
Left side Left side
Left sideBehind Behind
Behind
BehindTwo side
Two side Two side Two side
Up
Model
Right side Right side
(Due to S930F is top ventilation, do not need side space for radiating)
water inlet water inlet
water outlet
To Next Page
Loading...
