NOTE:
In the first time to refrigeration, the set hardness should not too high, when it is first time
use of machine, you will need to reduce the hardness,
after the ice cream is ready, you can
taste if the hardness is ok, if too soft, you can increase the hardness slightly, do not
increase the set hardness too high or it could lead to frozen cylinder.
You need to use air pump adjustable lever correctly according to your ingredients, if the
ingredients are too thick and many customers dispensing product, you need to move the
adjustable lever to the left
HARDNESS SETTINGS (Different ingredients with different hardness)
S110F(220V) S230F(220V) S520F(220V) S520F(380V) S930F(220V) S970F(220V) S970F(380V)
1.8 1.8 2.2 1.5 2.2 2.2 1.5
NOTE: you can adjust the time for air pump to intake mix, press OFF for 5 seconds,
after the screen shows
P1,then short press OFF to switch until you get to "UD", the set
time is 15 seconds, you can adjust through UP or DOWN, the more thick of
ingredients, the more time for pump to work, we recommend to more than 20 seconds.
Dispensing
To Next Page
Loading...
