•
•
Never connect fixture with power on.
Do not mount or support product in a manner that can cut the outer wire jacket or damage the wire insulation.
Avoid covering LED products with insulation, foam, or other materials that will prevent convection or conduction cooling.
Never connect an LED product directly to dimmer packs, occupancy sensors, timing devices, or other related control devices,
unless individual product specifications deem otherwise.
LED products are polarity sensitive, ensure proper polarity before installation.
CAUTION
·
·
·
PACKAGE CONTENTS
HARDWARE CONTENTS:
HARDWARE SHOWN-NOT ACTUAL SIZE
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
SKU Number: 356-4304
356-4305
1200 Lumen LED Security Light
Model Number: Z-SD1200W
Z-SD1200B
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-855-508-3883 Monday –
Friday 7:00 a.m. – 5:00 p.m. CST
B
C
A
FED
Plasc Screw Cover
x1
Stainless Steel Screw
x1
Gasket (oponal)
x1
Cross Bar
x1
Wire Nut
x2
Stainless Steel Mounng Screws
x2
·
Turn off electrical power at fuse or circuit breaker box before wiring product to the power supply.
·
Verify voltage is 120V before installing.
·
Make all electrical and grounded connections in accordance with the National Electric Code and any applicable local code requirements.
·
All wiring connections should be capped with UL listed wire connectors.
To Next Page
Need help?
General
