Read all instructions before installation, then store in a safe place for future reference. Failure to do so may
result in faulty assembly and potential injury.
CLEANING AND MAINTENANCE: To prolong the original appearance, clean the light fixture with a soft, damp cloth. Do not use paints, solvents, or
other chemicals on this light fixture. They could cause a premature deterioration of the finish.
LOCATION: Fixture can be wall mounted.
Recommended installation height: 6 - 8 feet above the ground.
Some environmental factors may affect the sensor range and could result in a reduction in sensor detection distance.
It is recommended not to mount the fixture near a heat source like an air conditioner, vent, or furnace exhaust, or in a direction facing a light
reflecting object.
SAFETY INFORMATION
• Your light is not a toy. Keep it out of reach from small children.
• If using a step ladder, you may require a second person to help install the light.
• Prior to installation, lay out all components and check against the part list section in this manual.
• CAUTION! Never look directly into the light when illuminated.
FEATURES:
Motion sensor:
AUTO Mode - At night, turns light ON automatically when motion is detected and turns light OFF automatically after all motion is stopped.
ON Mode - The light will turned on during the day or night.
• Adjustable motion sensor
• Adjustable time and sensitivity settings
PREPARATION: Tools required for assembly (not included): Phillips screwdriver, safety goggles, power drill and ladder.
Sku Number: 356-9453
Battery Operated Security Light
Model Number: ES01009G
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 855-232-6423
Monday – Friday 8:00 a.m. – 8:00 p.m. (EST)
To Next Page
Need help?
General
