To Next PageTo Next PageWhat to do if my Pattfield Ergo Tools Switch pump does not cut in?
If the pump does not start, there could be several reasons. First, check the cable and fuse to ensure there is no power failure. Second, verify that the pump is switched on. Finally, if no transport fluid is being discharged and the output line is adequately pressurized, open the consumer.
Why does my Pattfield Ergo Tools PE-DFS 10 Switch pump not cut out?
The pump may not cut out because of two possible reasons. The first one is a leak on the output side, so check consumers and the output line for leaks. The second possible reason is that the consumer is open, so close the consumer.
What to do if Pattfield Ergo Tools Switch pump cuts out and in constantly?
If the pump is cutting out and in constantly, it means that there is a leak on the output side. Check consumers and the output line for leaks to fix it.
General| Brand | Pattfield Ergo Tools |
|---|---|
| Model | PE-DFS 10 |
| Category | Switch |
| Language | English |
Covers essential precautions, reading manuals, and general warnings for safe operation.
Mandatory use of RCDs, PRCD-S, and proper electrical connection guidelines.
Prohibits use in swimming pools and areas with people or animals present.
Identification of the main components of the flow switch as shown in Figure 1.
Details the intended use for domestic water supply and converting irrigation pumps into automatic systems.
Disclaimer stating the equipment is not intended for commercial, trade, or industrial applications.
Lists key technical specifications including voltage, current, pressure, and temperature ratings.
Detailed instructions for connecting the flow switch to the pump and power supply, including orientation and filling.
Explanation of the status indicated by the Green, Yellow, and Red LEDs on the flow switch.
Description of different operating modes indicated by LED combinations and their meanings.
Crucial safety warning regarding the replacement of the power cable by qualified personnel only.
States that the flow switch requires no internal maintenance, only external checks for leaks and security.
Details the necessary information required when ordering replacement parts for the flow switch.
Details additional warranty services provided by the manufacturer, supplementing statutory rights.
Explains what warranty services cover (defects) and explicitly excludes commercial/industrial use.
Lists specific exclusions from the guarantee, including incorrect installation, misuse, and environmental damage.
