Pattfield Ergo Tools PE-DFS 10 - Troubleshooting

GB
- 115 -
10. Troubleshooting
Fault Possible cause Remedy
Pump does
not cut in
- Power failure
- Pump not switched on
- No transport fl uid is
being discharged, the
output line is adequate-
ly pressurized
- Check the cable and
fuse
- Switch on pump
- Open consumer
Pump cuts
out and in
constantly
- Output side leaking - Check consumers and
output line for leaks
Pump does
not cut out
- Output side leaking
- Consumer open
- Check consumers and
output line for leaks
- Close consumer
Anl_ED_Schalter_PE_SPK7.indb 115Anl_ED_Schalter_PE_SPK7.indb 115 27.10.15 13:1127.10.15 13:11