GB
- 110 -
•
Pull the mains plug before starting any work on the equipment.
•
Do not expose the equipment to a direct jet of water.
•
The operator is responsible for complying with local safety and in-
stallation regulations (ask an electrician if you are in any doubt).
•
Consequential damage caused by flooded rooms in the event of
the pump suffering faults must be prevented by the user by means
of suitable measures (for example installing alarm systems or a
reserve pump, etc.).
•
In the event of a failure, repair work may only be carried out by an
electrician or by after sales service personnel.
•
The equipment must not be installed in the drinking water pipe
line.
Anl_ED_Schalter_PE_SPK7.indb 110Anl_ED_Schalter_PE_SPK7.indb 110 27.10.15 13:1127.10.15 13:11
To Next Page
Loading...
Need help?
General